The only soldering components needed to start the soldering activities are the soldering iron and some solder. Though it is possible to carry out the soldering process with only a soldering iron, however, acquiring a few additional tools could make it a lot easier.
The quality of the electronic soldering tools is something you should not compromise with and so you can partner with a reliable and trusted electronic soldering equipment manufacturer for quality and durable products. Here are some components of soldering equipment.
1. Soldering Iron
There is little or nothing you can do without an electronic soldering iron. For beginners, you do not need to purchase a very expensive one.
However, as you make progress in the job by working on an advanced board, you might want to go for an improved and more costly one. One important substance though not a tool is the solder wire. It is needed in the process as well.
2. Wire Cutter
The wire cutter is a handy little soldering component. It is used to cut or remove the end of a wire. They are also referred to as electronic clippers or snippers. Alternatively, you can also go for something similar and much easier which is a wire stripper
3. Soldering Tools For Desoldering
Sometimes you may make mistakes in the process of soldering, and you need to replace such components in a circuit. This implies that you have to desolder it to fix it appropriately. Two tools are needed for desoldering and these are solder sucker and solder wick.
I. Solder sucker
The solder sucker is also known as a solder pump which is a mechanical vacuum pump that sucks away the solder from the solder joint. The solder joint is heated to make it change to fluid then it is sucked off using the solder pump.
II. Solder wick
Another tool made for removing solder is the solder wick, which is made up of copper thread that absorbs solder from the joint on the board in a circuit. This is used to remove a small quantity of solder from a solder bridge i.e. between the pins on a circuit.
4. Tweezers
Tweezers are components of the electronic soldering equipment that is used to keep the solder in place to avoid burning to your fingers.
5. USB Microscope
A USB microscope is a valuable component that is used in debugging process. With the help of a microscope, you can uncover the tiny solder joints that exist between pin which is not supposed to be there. This component is useful for people with eye defects as this will aid them in doing the work perfectly.
6. Wet Sponge
A wet sponge is useful for making the tip of the soldering iron clean during the process. The tip should be clean intermittently and regularly during and after use. This usually comes with the soldering iron stand.
7. Soldering Stand
In the course of soldering, the soldering iron becomes hot and needs to be placed in a safe place to avoid any accident. The soldering stand is ideal for this purpose.
In need of a high-quality electronic soldering equipment ?
Electronic soldering equipment is an important aspect of soldering and to get a quality one, you need to partner with a reliable and trusted electronic soldering equipment manufacturer.
At Guangdong Shunde Gordak electronic company, we are globally recognized for manufacturing standards and high quality that is strong and reliable.
Our team of experienced high-tech professionals is dedicated to giving you the best and we do not compromise with our delivery time. Kindly click to view our various products.