A Guide to Selecting the Perfect Welding Power Supply

Views: 96 Author: Site Editor Publish Time: Origin: Site

Selecting the perfect welding power supply for your project can be mentally and physically tasking. Whether you're a novice to welding or want to take it to the next level, it can be difficult to know what you should look for.

Welding is a process of joining two similar or different materials (commonly metals) together.

Welding power supply is a device whose primary function is to provide or modulate sufficient power for welding process.

In this article, we will walk you through some options to consider when selecting a welding power supply that is efficient, powerful and easy to handle.

Here are five major guides to selecting the perfect welding power supply for your project;

 

1. Consider the welding location

The welding location is a vital factor to consider when selecting a welding power supply.

Whether it is a home project or an indoor installation, it is important to use a welding power supply that does not produce excess sparks and spatter.

Also, your device should be able to operate at a power of around 220 to 240 volts : since 220 volts supply is a standard supply that any residential or commercial area receives.

 

2. Consider the nature of the material to be used

The component of the material and its thickness must also be considered. Welding is usually done on materials like Stainless steel, Carbon steel Cast iron and Aluminium.

Although Stainless and Carbon steel is compatible with many kinds of welding machine, Aluminium requires more complex ones.

In case the welding material is thick, then you will need a power supply that can produce enough current to weld appropriately.

 

3. Determine the welding process to be used

The type of process used in welding is also an important factor to consider when selecting a welding power supply.

The process of Stick welding is normally used for welding materials like Stainless steel, Carbon steel, and Cast iron. It is cost-effective since it does not need shielding gas.

A Shielded Metallic Arc Welding(SMAW) machine that produces more amperage at the start which keeps it hot and helps prevent the electrode from sticking when striking an arc should be used.

 welding power supply

4. The product should come with a manual

The main function of a manual is to give assistance to a user on the proper usage of any machine. A user manual points out important things to look out for and do while making use of the machine.

It informs you of the things you must avoid while using your device. This information usually contains the things that may render your warranty invalid and ways to forestall any risk.

It can be found at the safety hazards section in your manual.

 

5. Make sure the product has warranty

A warranty is the assurance that a manufacturer gives to a buyer that a product or service is genuine and just as represented.

A warranty gives you the assurance that the product you have bought is of good quality and is void of manufacturing faults and errors

It usually covers repair and replacement cost due to factory and design flaws and defects.

 

Reach out to us for high quality guaranteed welding power supply

Are you looking for a deep welding, easy to use and high precision control welding power supply? Search no more.

We provide a wide range of top quality and portable welding power supply that have high anti-jammimg circuit and are best suited for all your welding needs. Click here to view our product.

×

Contact Us

captcha