/

News

Benefits of Using Soldering Accessories

Soldering is a complicated procedure of joining two things, specifically electronic ones. Jewelers also use soldering accessories to join metals to give the final shape. Soldering is not like welding; instead, it uses some material that is filled between the joining things to make them one.

Soldering is majorly the terminology of the field of electronics because it is used in repairing any thermal damage in the printing circuit board (PCB). However, efficient soldering demands an optimal set of soldering accessories that have specific composition well suited for electronics repair.

Major soldering Accessories

Soldering accessories consist of two types of soldering items that are soldering equipment and filling materials. All the accessories are not used simultaneously; instead, all are used depending upon the type of damage and the nature of the repairing or manufacturing product.

Soldering is performed in an organized way to avoid short circuits; soldering accessories are used to normalize the temperature of the repairing product, and then using the soldering tool and filling material for the final repair.

Accessories

· Soldering heat preservation device

· Soldering assisting hands

· Soldering mat

· Soldering tape

· Soldering vise

· Soldering magnifying glass

· Iron tip cleaner

· Wire cutters

Filling material for soldering

· Solder flux

· Solder

· Seal/connectors

· Solder tips

· Solder paste

· Solder suck and wicks

Benefits of using soldering accessories

Below are some of the benefits

1. Heat preservation treatment

Soldering accessories are very important because soldering equipment and tools, when using soldering material, join any damage in the circuit; they can cause thermal shock due to overheating or temperature differences.

Hence, soldering accessories such as a preheaters rework station are used for heat preservation treatment to avoid any heat shock in PCB.

2. Easy handling

Soldering accessories such as soldering helping hands are very assistive because the helpings hands simply hold the repairing wires or metals, facilitating the repairer to easily fill up the soldering material and join the wires.

The hands-free facility increases the precision of the repairing process, finally increasing the overall efficiency. Interestingly helping hands could be more than two depending upon the advancement in technology.

3. Heat resistance

Another usefulness of the soldering accessories is their ability to resist heat, such as a soldering mat. The heat-resistant accessory will protect your surrounding walls, wires, and floors from heat or flame.

Heat-resistant soldering accessories are mostly used while repairing plumbing but can also be used in any soldering.

4. Microelectronic repairing

Soldering accessories are also very beneficial in repairing damage to microelectronics; a soldering magnifying glass is used for microelectronics repair.

It is essential because, in the field of microelectronics, there is a need for minor detailing and precision that is not possible only with human resource input.

5. Fume absorber

Soldering accessories are also very useful in protecting your health because the fumes, when released while joining wires or metals, could be absorbed by a smoke absorber soldering accessory, providing health benefits.

You just have to place the absorber on the table, and it will automatically absorb fumes through the sucker and filter them out to protect you from inhaling chemicals.

Soldering accessories are very beneficial both for your health and your profession. You can get variety of Soldering Accessories from us without spending too much.

more insights

Digital Soldering Iron 936

Common Soldering Problems And How To Fix Them

Have you been struggling to make the most of your soldering projects? Or perhaps you are just looking to get started with soldering and want to ensure you’ve got the necessary skills and knowledge in place first to help. Whatever the case might be, today, we’re looking at some of the most common soldering problems you should know about to help you decide how to approach these (and how to fix the issues, accordingly). 5 Soldering Problems and How To Fix Them Soldering can be a somewhat daunting task, and with this in mind, it can be easy to fall into a few common traps. Nevertheless, there are several easy steps you can take to help ensure you solder correctly and without making a mistake, and below are just a few of the most common issues you should be aware of. #1 Disturbed Joints Disturbed joints can be among the more common issues when soldering. These occur when the components or materials being soldered are moved while the solder is setting, which can cause the surface of the solder to appear rough; the displaced solder may also prevent a proper bond or connection from forming. Luckily, this can be prevented by ensuring parts are held tight while the solder is setting, and if needed, such problems can be repaired by reheating and carefully moving the solder into place. #2 Solder Starving “Solder starving” is an issue that arises due to too little solder being applied to the components; as such, poor or weak connections are made. This might result in insufficient electrical contact and poor joint strength, also leading to stress cracks over time. In order to correct this issue, re-heating the joint and adding a small amount of additional solder can potentially help by creating stronger bonds, instead. #3 Cold Solder Joints It’s easy to make a mistake with temperature when soldering, and cold joints are often formed when the soldering iron simply isn’t at the right temperature to begin with. This can prevent the solder from melting or flowing efficiently, which can in turn lead to poor sold placement or amounts. In turn, this can often leave a rough or unfinished look, and the solder may not form a strong bond, impacting the final results of the soldering work. #4 Overheating Opposite to leaving the solder too cool, overheating can also be a major issue – often one of the more extreme problems one might face when soldering, in fact. In many cases, high temperatures can scorch or burn the components and materials, leaving a burnt residue behind that is known as flux. Fortunately, such issues can potentially be fixed carefully with an isopropyl alcohol solution; however, more serious burns may need to be carefully scraped off, which can cause damage in itself. #5 Solder Bridges As a final issue to keep in mind, applying too much solder in close proximity to another solder joint can lead to solder bridges. This can create an unintended connection, resulting in short-circuiting or even complete inoperability, depending on the nature of the part and the severity of the solder bridge. As such, taking care to prevent this is hugely important; if you do experience any solder bridges, these may need de-soldering and fresh solder. If you have further questions, feel free to contact us at info@gordakelec.com.

Read more >
best soldering station for electronics

How To Solder A Circuit Board Without Damaging Components

Soldering can be an incredibly effective technique to use – however, making sure that you have soldered carefully is hugely important. In line with this thought, today, we’re looking at some of the key tips you should be following to help avoid causing damage to your circuit boards while soldering; hopefully, this will allow you to find the optimal approach for your own circuit board soldering efforts. 4 Tips To Avoid Damaging Circuit Boards When Soldering There are a number of techniques to note when soldering delicate electronics, such as circuit boards. Indeed, it can often be easy to make mistakes when soldering; as such, knowing the potential issues may help avoid damaging the components you are attempting to solder. #1 Pick The Correct Soldering Iron It may seem obvious, but one of the most important factors to keep in mind when soldering to ensure you are using the correct soldering iron is crucial when it comes to delicate electronics. Typically, the best soldering irons are those with variable temperature settings, which allow you to adjust the temperature accordingly to avoid damaging the circuit board. Nevertheless, fixed temperature options can still be used; however, you should always make sure that your chosen iron is a suitable temperature for the project in question. #2 Invest in a Reworking Station If you do make a mistake, consider investing in a reworking station. Indeed, reworking stations are ideal for adjusting or removing solder; however, they should not be used to solder components together directly due to the lack of precision and control. #3 Use The Right Solder Material It’s not just the soldering iron that should be right for your project; choosing the right solder is another essential factor to consider as part of this. Indeed, different solders have different properties, which can potentially damage your materials. There are two main types of solder used in electronics: lead-based and non-lead-based solder. Lead-based solder offers a lower melting point and is generally easier to work with, but there are naturally potential health risks associated with these, and high temperature irons could cause excessive melting and damage. Alternatively, non-lead-based solder may have a slightly higher melting point, which can be easier to control; however, it is better for the environment and your health. Choosing the right solder can also influence the chance of accidentally damaging the board, so take care with this to select the most appropriate option. #4 Always Use Additional Supports Soldering can be an incredibly complex and intricate process; as such, making sure you have plenty of supports in place is crucial to keep things stable and steady. Support stands can help hold the circuit board in place while you solder, preventing wobbling and risk; this also helps to free up both hands, allowing you to focus more carefully on the task at hand. Some stands even come with a magnifier to help when working on very small or intricate electronics, which helps reduce the risk of making a mistake on your projects. If you have further questions, feel free to contact us at info@gordakelec.com.

Read more >
Soldering Station

What Is The Difference Between a Soldering Iron And A Rework Station?

Soldering is an incredibly valuable process, offering a wide variety of benefits that can help make it a useful tool. However, if you have been struggling to find the optimal tools for your needs, knowing about the different options can help; in accordance with this thought, today, we’re looking at solderion irons and reworking stations – and, critically, how these differ from one another. Soldering Irons and Reworking Stations: What You Should Know If you have been looking to begin soldering work, it’s highly important to start with the right tools. As part of this, we’ve outlined some of the key things you should know about soldering irons and reworking stations as follows to help. What Is A Soldering Iron? When soldering, arguably the most important tool is the soldering iron itself – in other words, the heating element that is used to melt solder. These devices work by heating a soldering tip to a high temperature, which can be used to melt solder into a molten state. In turn, this liquid solder is then allowed to gradually re-solidify, which forms a solid solder bridge as a result. Soldering provides a range of benefits and often proves particularly useful in electrical applications. However, the range of potential uses for solder can be incredibly versatile, with these materials able to lend themselves to a huge array of applications, such as plumbing and even glass, composite, and ceramic product production. Soldering irons are extremely accurate and precise, making them crucial for soldering projects. They are also used for intricate tasks and cost significantly less than a rework station, making them excellent options for occasional work needing a high standard of finish (without the investment required for a full reworking station). What Is A Rework Station? At this point, we’ve considered how soldering irons work – but what about rework stations? Well, whereas a soldering iron is designed to apply solder, rework stations instead allow you to manually alter and tweak existing solder. In turn, this makes it a crucial piece of equipment for businesses or projects needing a way to alter existing solder without damaging the components themselves. Finding the Right One For Your Needs Both soldering irons and reworking stations can be incredibly valuable, and this is well worth keeping in mind if you have been looking for a suitable device for your needs. In fact, if your business or project focuses on soldering, it may be worth considering both options, as they provide very different solutions and therefore can both lend themselves to your project. Indeed, you’ll need a soldering iron to accurately apply solder in the first place; however, if you subsequently need to remove, replace, or alter the solder for any reason, having a reworking station may prove useful. With this in mind, if you have been looking to get involved with more complex soldering projects, we strongly recommend considering both products to help. Luckily, we here at Gordak are some of the leading providers of soldering products, so contact us today at info@gordakelec.com to learn more and to see how these might work for you.

Read more >
  • +8618025978448
  • info@gordakelec.com
× Send