A preheater station such as the air preheater is a device employed to heat air and any other substance before another process.
A good example is a combustion panel in a boiler which helps to improve the thermal efficiency of the operation.
Sometimes, this preheater station may be utilized alone or may serve to replace a malfunctioning heat engine or to function in the place of a steam coil.
The preheater station market is gradually becoming larger each passing day and there are numerous products littered everywhere.
If you want to source the best quality product, you need to partner with a reliable and trusted preheater station manufacturer.
Some benefits we can derive from the use of preheater station are:
1. Allows outgassing of volatile solvents
The outgassing process is one of the major benefits of employing a preheater station. The preheater station causes the volatile component of the solder paste to evaporate.
If there is a huge and sudden change in the temperature of the system, the rate of evaporation may cause splattering of the solder paste which consequently reduces the size of the solder paste at the seam of the materials.
2. Activates flux
The flux forms part of the solder and it is usually activated when a hot soldering iron is applied to it.
The function of the flux is to decontaminate the surface of the metal that is in contact by removing the oxides.
When this is done, there will be good adhesion and strong bonding of the two metals in contact. If the temperature of the preheater station is low, then the process of flux activation will not be effective and this results in a joint that is cold and without complete flow.