Know These Before Choosing a Soldering Rework Station

Views: 95 Author: Site Editor Publish Time: Origin: Site

Over the years, the use of Soldering process in joining metal or Plastic materials together to manufacture a particular end product has become significant in many manufacturing industries.

If you own an industry that manufactures electronics, then you need certain important soldering tools which you should get fabricated by a reputable Soldering rework station manufacturer.

Soldering process is not limited to joining of metals or plastics. In electronic industries, Soldering rework stations are used to adhere resistors, Transistors and chips on motherboard.

By this time, you should be considering getting a soldering rework station. But wait... Take time and read this article where we will walk you through important things you should know before choosing a Soldering rework station.

 Soldering rework station manufacturer.

Classification of Soldering Rework Stations

Before making a decision to get a supply of Soldering rework station, you should know the classifications of soldering rework stations available.

From these, you can  choose the one that best suits the particular application. On a broad basis, Soldering rework stations are classified as:

 

1. Contact Soldering Rework Stations

This particular class of Soldering Rework Stations has the ability to alter the electronic temperature. It has a unit which is equipped with a soldering iron. The temperature of which can be adjusted depending on the purpose.

Power is an important factor to consider when using a Contact Soldering rework station. These stations usually have a range of power between 10 to 200 watts. It follows that, the higher the power of the station, the higher its effectiveness.

 

2. Analog Soldering Rework Stations

This Soldering Rework Station functions continuously by maintaining an optimum temperature for the heating element.

when the temperature rises above a particular degree, the Component element of the station is overheated. When this happens, the power turns off.

However, when the temperature falls back to a lower degree, the power is turned on again to heat the element. This regulatory control ensures that the heating element does not burn off.

 

3. Digital Soldering Rework Stations

This Class of rework stations are more accurate and precise than the analog Soldering Rework Stations.

The digital Soldering station contains an automated regulator which uses a micro processor to control the temperature of the soldering iron. Digital Soldering Rework Stations are therefore easier to use.

 

4.  Induction Soldering Rework  Stations

This particular class of Soldering Rework Stations functions by harnessing a great amount of Power. It also maintains an extraordinary thermal stability. Thus, lower amount of energy is lost as heat.

Soldering Rework Station 

Choosing a Good Soldering Rework Station

When choosing a Soldering Rework Station, it is important to choose the one that reduces stress for the operator as well as the one which solders effectively.

You should ensure that the temperature control of the Soldering Rework Station is functioning properly and gives a well precise temperature.

Depending on your need, you may choose an analog Soldering station with an on-off temperature control system which is not as expensive as the digital Soldering Rework Station.

However, the better precision and efficiency of digital Soldering Rework Stations make them worthwhile an investment even though they are more expensive than the analog stations.

 

Contact Us For High Quality Soldering Rework Stations

Are you in need of Soldering Rework Stations for fabrication of electronic materials? Seems you are worried about getting a reputable manufacturer.

Worry no more, we got you covered. Being a reputable and experienced manufacturer of Soldering Rework Stations, we assure you of getting high quality ones. Click here to view our products or to place an order.

×

Contact Us

captcha